> News

News

What Are the Limitations of Using a Dismating Joint in Your Machinery?

Learn about the potential drawbacks of utilizing a dismating joint in your industrial equipment and machinery. Find out if this type of joint is right for your specific application.

What Is a Check Valve Used For?

A check valve is a valve that has a circular disc as the opening and closing part and blocks the backflow of the medium by its own weight and medium pressure. It is an automatic valve and is also called a non-return valve, a one-way valve, a return valve or an isolation valve.

What Is the Purpose of a Gate Valve?

As a widely used fluid management device, gate valve uses a gate or wedge-shaped disc to move vertically with the fluid to open or block the flow of fluid in the pipeline. Gate valve is the most commonly used valve type in all process equipment.

What is the difference between a Strainer Filter and a regular filter?

Learn about the differences between Strainer Filters and regular filters in this article.

Which type of crane is used in industry?

Several types of cranes are used in industrial settings, each suited for different tasks and environments.

What is a rubber flap check valve

Unique non-impact rubber flap check valve, the component design is mainly composed of three main parts: valve body, valve cover and rubber flap, not only zero leakage, but also because the valve flap is covered with NBR rubber and the device is inclined at 40 degrees Angle, can greatly reduce water ......

<...28 29 30 31 32...35 >